Perfume bottle landed cost is the FOB price plus freight, insurance, duty, fees and inland delivery. A DDP price bundles those same costs into one number and hands you the total. The gap between two quotes is rarely the bottle. It is what each quote leaves out.
Two suppliers quote the same 50 ml bottle within 3 cents of each other. One quote is FOB Ningbo. The other is DDP to a New Jersey warehouse. The DDP number looks simpler, and it might even look cheaper.
But you can’t compare what you can’t see. If you don’t know which costs are inside a bundled quote, you don’t know whether it’s a bargain or a trap.
You already compare unit prices. What you need is a repeatable way to compare total costs, plus a rule for choosing between FOB and DDP. This guide gives you both.
Still choosing the bottle? Start with our perfume bottle range, or send your spec for a quote.
Key Takeaways
- Perfume bottle landed cost is the FOB price plus freight, insurance, duty, fees and inland delivery. The FOB price alone explains less than half the spread between quotes.
- Under FOB you control freight and see every cost. Under DDP the supplier pays duty and normally acts as the importer of record.
- US duty on empty glass fragrance bottles ranges from 2.5% to 28.5%, depending on the HTS line and the declared value per unit.
- The cheapest bottle can carry the highest duty rate. A 2-cent price gap near a value bracket can shrink to under 1 cent after duty.
- The $800 de minimis exemption is suspended for imports outside the international postal network, so small orders now need entry and pay duty.
What Perfume Bottle Landed Cost Includes

Landed cost is the total cost of one bottle sitting in your warehouse, ready to fill or sell. It starts with the supplier’s price and adds every cost needed to move the bottle from the factory to your door. Those costs stack in six layers.
| Cost layer | What it includes | Who controls it | How to verify it |
|---|---|---|---|
| Product | Bottle, pump, cap, collar | Supplier | Approved sample and spec sheet |
| Decoration | Print, coating, label | Supplier | Decoration proof and AQL |
| Packing | Cartons, dividers, pallets | Supplier | Packing list and carton test |
| Freight and insurance | Ocean or air, plus cover | Buyer under FOB, supplier under DDP | Freight quote and insurance certificate |
| Duty and fees | Tariff, brokerage, bond, entry | Buyer under FOB, supplier under DDP | Entry summary (CBP Form 7501) |
| Inland delivery | Port to warehouse | Buyer under FOB, supplier under DDP | Delivery note and invoice |
The FOB unit price is the starting point, not the cost. A $0.55 bottle can land at $0.63 or $0.74 depending on its duty line and the shipment fees.
The first two layers are where the supplier competes. We break them down in custom perfume packaging cost by component and what drives wholesale perfume bottle pricing. Everything from layer three onward is this page’s job.
Want the six layers priced for your bottle? Send the bottle spec, decoration and destination port, and we’ll quote the product side in plain figures. Request a wholesale quote.
FOB vs DDP: Who Pays for What
FOB and DDP sit at opposite ends of the cost chain. The difference isn’t just who pays. It’s who holds the risk, who clears customs and who can see the bill.
FOB: you own the freight decision
Under FOB (Free on Board), the supplier delivers the goods on board the vessel at the named port and clears them for export. Risk passes to you once the goods are on board. From that point you arrange and pay for the main freight, insurance, import clearance, duty and delivery.
FOB is a sea and inland-waterway term in Incoterms 2020. It gives you the most control and the clearest cost breakdown, but the freight risk is yours.
DDP: one number, less visibility
Under DDP (Delivered Duty Paid), the supplier delivers the goods cleared for import at the named place and pays the duty and taxes. The DDP shipping quote is door-to-door and easy to budget.
The catch is visibility. A DDP price rarely shows the freight rate, duty rate, broker fee or classification. You’re comparing a total against a total, blind to the assumptions behind it.
The DDP trap: the importer of record
To clear goods for import, someone must act as the importer of record (IOR). Under DDP, that is normally the supplier or an agent it appoints. This matters more in the US than it used to.
CBP has issued heightened requirements for foreign importers of record, effective January 5, 2027. A supplier offering DDP without a US entity, a bond and a compliant broker arrangement may not clear your shipment cleanly.
There’s a second risk. If CBP reclassifies the bottles to a higher duty line, the dispute belongs to the IOR, and your goods can sit at the port while it’s resolved. A DDP quote transfers the paperwork, not the delay.
| Cost or step | FOB | DDP |
|---|---|---|
| Export clearance | Supplier | Supplier |
| Loading at origin port | Supplier | Supplier |
| Main freight | Buyer | Supplier |
| Cargo insurance | Buyer | Supplier |
| Import clearance | Buyer | Supplier |
| Duty and taxes | Buyer | Supplier |
| Delivery to named place | Buyer | Supplier |
| Risk transfers | When goods are on board | At the named destination |
| Importer of record | Buyer | Supplier or its agent |
| Cost visibility | Itemized | Bundled |
Two nearby terms get confused with these. DAP ends at your door, but you still clear and pay the duty. CIF ends at the destination port, where the buyer still clears and pays duty. EXW puts export clearance on the buyer too, and is rare with Chinese suppliers.
Duty Is Charged Per Bottle, and the Rate Falls as Value Rises

US duty is assessed on the transaction value of the goods, not on the freight. 19 CFR 152.103 sets the rule: the customs value is the price actually paid or payable, plus additions such as buyer-supplied packing. International freight and insurance are excluded.
So a $27,500 bottle order doesn’t pay duty on $29,700 of freight-inclusive value. Freight and duty are separate levers, negotiated with different people.
Two headings, two very different bills
Empty glass fragrance bottles usually land under one of two HTS headings, and the choice is made by your broker, not by the supplier’s price list.
- 7010 covers glass containers “of a kind used for the conveyance or packing of goods.” The relevant lines are 7010.90.20 for containers produced by automatic machine, at 2.5%, and 7010.90.30 for other containers, at 5.2%.
- 7013 covers glassware for table, kitchen, toilet, office or indoor decoration. The fragrance-relevant line is 7013.37, where the rate depends on the value of each unit.
The 7013.37 brackets, read from the USITC HTS on November 13, 2026, are:
| HTS line | Declared value per unit | General duty rate |
|---|---|---|
| 7013.37.10.01 | Not over $0.30 | 28.5% |
| 7013.37.20 | Over $0.30, not over $3 | 22.5% |
| 7013.37.30 | Over $3, not over $5 | 11.3% |
| 7013.37.40 | Over $5 | 5% |
| 7013.37.05 | Pressed and toughened glass | 12.5% |
These are general (MFN) rates. Section 301 and other additional duties are separate, change often, and must be checked against the current Chapter 99 notes before you approve an order.
The bracket cliff that flips a cheap-bottle decision
Read the table again. The rate falls as the value rises, the opposite of how most buyers think about a cheap bottle.
Take a bottle quoted at $0.29 and another at $0.31. The first sits under the $0.30 line at 28.5%, so duty is about $0.083 per bottle. The second clears the line at 22.5%, so duty is about $0.070.
On 50,000 bottles, the $0.29 bottle saves $1,000 on the invoice and pays $645 more in duty. The net saving is $355, not $1,000.
The duty step gets bigger than the price step near a boundary. A bottle at $0.305 can land cheaper than one at $0.29, even though it costs more FOB.
This isn’t a reason to massage a declared value. The value must be the true transaction value. It is a reason to check the bracket before you choose between two close quotes.
Maya learned this the expensive way. She compared a $0.38 bottle with a $0.41 bottle and chose the $0.38. Both sat under the $3 line at 22.5%, and the saving held.
Her colleague then compared a $0.28 bottle with a $0.31 bottle using the same logic. The $0.28 bottle crossed into the 28.5% bracket. Landed, the “cheaper” bottle was not cheaper. Hypothetical, but the arithmetic is not.
Tell us the bottle and the volume, and we will send the specifications your broker needs to classify it correctly. Ask for the bottle spec sheet.
The Freight Math: Volume, Weight and Mode
Bottles are light for their size, and that changes the freight calculation. Carriers charge on chargeable weight, which is the greater of actual weight and volumetric weight.
For air freight, volumetric weight is commonly calculated at 6,000 cubic centimetres per kilogram. Express carriers often use 5,000. A carton that weighs 8 kg but measures 0.06 m³ can be charged as 10 kg by air. On a bottle order, the carton volume usually decides the bill, not the glass.
Sea freight is cheaper per unit but measured in weeks, not days. Air freight is faster and far more expensive per kilogram. Express costs the most per unit and usually suits samples, not a launch.
Insurance is usually arranged at 110% of CIF value, a trade convention rather than a legal rule. Premiums vary with route, carrier and packaging, so ask for the rate in writing and check that breakage is covered.
Bottle geometry raises freight per unit in three ways. Thick glass adds weight, wide shoulders and heavy caps add carton volume, and poor dividers add breakage. Breakage brings replacement cost, air freight and a delayed launch.
One boundary matters. This page prices empty bottles and closures as cargo. Filled perfume is regulated as dangerous goods, a separate job we cover in international perfume bottle shipping.
A Worked Landed-Cost Example
The landed cost formula is the same for every quote: goods value, plus freight and insurance, plus duty and entry fees, divided by the number of bottles. The model below is illustrative, not a quote. Round assumptions, easy to swap for your own numbers.
Assumptions: 50,000 bottles, 50 ml, with crimp pump and cap. FOB Ningbo $0.55 per unit, so goods value is $27,500. Packing is 100 units per carton, 12 kg and 0.055 m³ per carton: 500 cartons, 6,000 kg, 27.5 m³. Freight and origin charges assumed at 8% of FOB ($2,200), insurance at 0.35% of CIF ($104), entry fees at $900.
| Step | Calculation | Per unit |
|---|---|---|
| FOB goods value | $27,500 ÷ 50,000 | $0.550 |
| Freight and origin charges | $2,200 ÷ 50,000 | $0.044 |
| Insurance | $104 ÷ 50,000 | $0.002 |
| Duty, scenario A: 7010.90.20 at 2.5% | $687.50 ÷ 50,000 | $0.014 |
| Duty, scenario B: 7013.37.20 at 22.5% | $6,187.50 ÷ 50,000 | $0.124 |
| Entry fees | $900 ÷ 50,000 | $0.018 |
| Landed cost, scenario A | $31,391.50 ÷ 50,000 | $0.628 |
| Landed cost, scenario B | $36,891.50 ÷ 50,000 | $0.738 |
The multiplier is as useful as the total. Scenario A lands at 1.14× FOB, scenario B at 1.34× FOB: a 20-point swing from classification alone, before any additional duty.
Section 301 and other additional duties are excluded here. They sit on top of the general rate and depend on the current action and HTS line, so add them before comparing with a DDP quote.
The fees that never appear in the quote
The entry fee line is where small orders lose their margin. The common charges are:
- Customs brokerage, per entry.
- ISF filing, for ocean shipments to the US.
- Importer bond, annual or per shipment.
- Terminal and port fees, which vary by port.
- CBP exam, if the shipment is selected.
- Demurrage and storage, if clearance is late.
- Currency conversion and payment fees, on the wire.
- Inspection and defect allowance, if you book a third-party check.
None of this is unusual. The problem is timing: these charges arrive after you’ve committed to the unit price. Put an allowance in the model first.
De minimis: small orders now pay duty
The $800 de minimis exemption is indefinitely suspended for merchandise arriving through all modes other than the international postal network. Those shipments now need formal or informal entry, and a companion rule covers mail.
Sample boxes and small top-up orders are no longer automatically duty-free. Budget the entry fee and duty on the first order, not just the bulk one.
Tom found the other side of the DDP trap. His DDP quote came in 12% below his own FOB-plus-forwarder math, so he took it. The quote had excluded an additional duty that applied at entry.
The supplier, acting as foreign IOR, couldn’t clear the shipment without new documentation. The goods sat for nine days while the paperwork was fixed. Hypothetical, but the pattern is common: a DDP price is only as complete as the assumptions behind it.
How to Compare Perfume Bottle Landed Cost Quotes

The only fair comparison is per-unit landed cost at the same place. Convert both quotes to that number first.
Start with the FOB quote. Add your forwarder’s all-in freight and insurance, the duty at the rate your broker expects, and the entry fees. Divide by the order quantity.
Then take the DDP quote and ask what it includes: which port or place, which duty rate, which classification, which additional duties, and who is the IOR. If the supplier can’t answer, the quote isn’t comparable yet.
Two estimates for the same order can differ by a third without anyone lying. Scope (freight only or all-in), mode (sea or air), destination and duty treatment each move the total, so check which four are inside each number.
The structure below works for any component, not just bottles. We use the same eight lines when we explain how to read a wholesale sprayer quote.
Every quote should state these eight lines:
- Incoterm and named place. “FOB Ningbo” and “DDP Newark” are not the same offer.
- Unit price and what it includes. Bottle only, or bottle with pump, cap and collar.
- Packing format. Units per carton, carton dimensions, gross weight.
- MOQ and volume breaks. The price at your quantity, not at 100,000. See how MOQ changes your per-unit cost.
- Lead time and ship date. Production time plus transit. Our own standard production time is 4 to 6 weeks.
- Duty treatment. Classification assumed, general rate, additional duties.
- Fees included or excluded. Brokerage, ISF, bond, terminal, delivery.
- Payment terms and currency. Who bears the conversion and the wire fee.
Red flags in a DDP quote: no classification, a duty rate described only as “included,” a price far below every FOB quote, or no US importer arrangement. Question any of them before you pay a deposit.
Priya ran the comparison properly. She converted both quotes to landed cost at the same port and found $4,800 of hidden fees in the cheaper DDP offer. The FOB route was $0.011 per unit cheaper once everything was counted.
Hypothetical, but the method is the point: normalize first, then negotiate.
Send your bottle specification, destination and target volume. We will quote the product side FOB so you can price the freight yourself, and flag the packing details your broker will need. Start a landed-cost quote.
FAQ
Is DDP cheaper than FOB?
Not necessarily. DDP bundles freight, duty and fees into one price and adds the supplier’s margin and risk premium.
FOB is usually cheaper when you have a competitive freight forwarder and can manage clearance. DDP can be simpler for a first small order, but ask what’s included.
How is import duty calculated on perfume bottles?
US duty is assessed on the transaction value of the goods, excluding international freight and insurance. The rate depends on the HTS line your broker assigns.
Empty glass bottles commonly fall under 7010.90 at 2.5% to 5.2%, or 7013.37 at 5% to 28.5% depending on the declared value per unit. Additional duties may apply on top.
Does the $800 de minimis rule still apply?
No, not for imports outside the international postal network. The exemption is indefinitely suspended, and those shipments need formal or informal entry. Check before you ship samples.
Should I ask my supplier for FOB or DDP?
Ask for FOB if you want to control freight, see every cost and use your own broker. Ask for DDP only if the supplier can name the place, the classification, the duty treatment and the IOR arrangement in writing. If it can’t, treat the price as an estimate, not a quote.
What is a normal landed-cost percentage?
There is no universal number. A freight-only uplift might be 3% to 10%. An all-in figure that includes duty, inspection and a defect allowance can reach 20% to 40%.
The number depends on mode, destination, duty line and order size, which is why you should model it per order.
Conclusion
Perfume bottle landed cost is a calculation, not a discount. The FOB price is one layer. Freight, insurance, duty, fees and delivery are the rest, and duty is charged on the goods value in a bracket that falls as the bottle gets more expensive.
Three habits keep you out of trouble. Normalize every quote to per-unit landed cost at the same place. Check the HTS line and value bracket before comparing two close prices. Ask a DDP supplier to name the place, classification, duty treatment and importer of record in writing.
If you remember one rule: the quote is a starting point, the entry summary is the proof. A quote you can’t decompose is a quote you can’t compare.
Send your bottle specification, annual volume and destination port. We’ll quote the bottle, pump and cap FOB, confirm the packing details, and give you the product-side numbers your broker needs to finish the landed-cost model. Request your FOB quote.





